More links and references

This page will contain links for Networking and wireless engineering.


People to Follow:
Blogs:

 Cisco Mobility Blog

Sam Clements

Mojo Blog



Sites to reference:

 Unifi Antenna radiation patterns

CWNP

Podcasts:

 WirelessLAN Professionals

No Strings Attached

Clear To Send

Comments

Post a Comment

Popular posts from this blog

6 1/2 types of Wi-Fi

Image
There are different PHY types or Wi-Fi types which are simply put different standards of use for each frequency. There are currently 6 Wi-Fi types or standards available today. The standards for Wi-Fi are defined by the  IEEE   in 802.11. The following are amendments to the 802.11 standards.  Wi-Fi 1 (802.11b) 802.11b or Wi-Fi 1 as it has recently been deemed. Was ratified by the  IEEE  in 1999. This technology is limited to 2.4Ghz only. It had a max bandwidth of 11Mbps. Wi-Fi 1 distance from the router. With free space path loss. https://www.imgtec.com/blog/802-11b-802-11b-question/ This technology is extremely outdated and holds back Wi-Fi networks from optimal performance. While all routers and Access Points(AP) are capable of supporting Wi-Fi 1, it is strongly encouraged to remove this support from your network. I will cover details of why later. If you happen to have something that is from the early 2000s that is still working...
Read more

Site Survey with Cisco Meraki APs

Image
 Having done a few APoS surveys with Meraki APs I wanted to share a couple little tips. This is just gonna be a short little post about RF profiles and applying settings to the AP.  While many of you may know that you can put the AP into Site Survey mode from the local status page of the AP.  To access the local status page follow these  instructions from Meraki's help guides. The default login for local status pages will be the serial number of the device you are accessing. If the AP has associated with a dashboard and a password has been set there you can find the login information under Network-wide>General.  The issue with site surveys with Meraki is the setting of the channel width. Even in site survey mode, this will default to 80MHz wide channels. This setting cannot be adjusted from the site survey menu in the local status page.  I have found, through talking with Meraki and trial and error, that the best way to apply settings to the AP is to set...
Read more

Ekahau GPS Survey

Image
 There are a few abilities with the Survey app out from Ekahau that I have found to be great improvements on the days I walked around with my connect-a-desk and my bulky laptop doing my wireless surveys with a SideKick. The light weight iPad is one such improvement, another is the ability to perform GPS surveys natively with the iPad. They have come in handy for those few outdoor areas the customer wants surveyed. I have used it both for APoS (AP on a stick) surveys and validation surveys. In this post I wanted to share how to set up a GPS survey, then a couple tips and tricks. Starting a GPS Survey To start a GPS survey is very simple you don't need a floorplan or a premade Ekahau file from Pro, all you need is your iPad with either a Wi-Fi connection or a dat plan and a good signal. You will not need a data plan or Wi-Fi connection to perform the survey, only needed for initial setup of the survey.  To begin you create a new project in the Survey app on your iPad then select...
Read more