Site Survey with Cisco Meraki APs
Having done a few APoS surveys with Meraki APs I wanted to share a couple little tips. This is just gonna be a short little post about RF profiles and applying settings to the AP. While many of you may know that you can put the AP into Site Survey mode from the local status page of the AP. To access the local status page follow these instructions from Meraki's help guides. The default login for local status pages will be the serial number of the device you are accessing. If the AP has associated with a dashboard and a password has been set there you can find the login information under Network-wide>General. The issue with site surveys with Meraki is the setting of the channel width. Even in site survey mode, this will default to 80MHz wide channels. This setting cannot be adjusted from the site survey menu in the local status page. I have found, through talking with Meraki and trial and error, that the best way to apply settings to the AP is to set...